Dust humidifier

Dust humidifier is mainly used in thermal power plants, steel mills, ironworks, chemical plants and other departments of the ash depot ash for water spray wet mixing and conveying powdery materials. The machine is used to mix and convey powdery materials evenly to achieve dust-free conveying requirements. Dust humidifier is also suitable for humidification, mixing and conveying of solid granular materials in chemical industry, mining and so on.

By two sets of spiral blade machine uniformly feed material into the host, into the mixing tank / mixing tank of dry grey powdery materials by the water supply device quantitative supply of water for forced mixing, mixing, while the humidity requirements of the material will meet the requirements of the conveyor to the discharge port discharge, to achieve the purpose of raising dust.

Characteristics

Dust humidifier takes the advantages of double-axis structure is mixing, the system is sealed tightly, no fly ash outside. Reducer compact structure, covers an area of small, smooth transmission, low noise, mixing uniformity, good blade, easy operation and maintenance, operation, blade using high manganese steel structure, equipment service life than the traditional equipment, long.

Requirements for use

Before starting the dust humidifier, check carefully whether all the parts, fasteners are tightened, sealing parts are tight. 2. 30 or 40 mechanical oil is injected into the reducer before it is put into normal operation. 3. The dust humidifier should be started and run normally before feeding, water supply, shutdown should be stopped to stop feeding, to be unloaded in the machine after the material is empty and then shutdown. 4. If the load of the motor is found to increase or decrease suddenly during operation, or if there is any abnormality in the mechanical system, the machine should be shut down immediately for checking and troubleshooting.

Folding editorial section use steps

The use of dust humidifier is required to have the steps in order to carry out.

1. The machine should be started after normal operation, before feeding, water supply, shutdown should first stop feeding, to be unloaded after the material in the machine and then shut down.

2. Before starting the machine, carefully check whether all the parts are, whether the fasteners are tightened, and whether the sealing parts are tight.

3. Inject No.30 or No.40 mechanical oil into the reducer, and the user can also choose suitable lubricant according to the local situation before putting it into normal operation.

Dust humidifier equipment features

The whole machine has a compact structure, good overall performance, technology, process is reasonable, high sex, good sealing performance, water can be adjusted wear and tear is small, large handling capacity, long life, can work continuously, low failure rate and so on.